Time title Door Blind Lights article Time subject Automated door light switches are now available on all new Toyota Corolla vehicles, as the automaker announced on Monday.The first-generation models with automatic door blinders were available in Japan in the U.S. and Canada earlier this year, but those models were discontinued in the States.Toyota's announcement Monday marks the first time the aut...
A simple way to turn an automatic car door into an automatic sliding door.
You won’t even have to lift the door when you install it.
The door arm, or auto door arm in this case, is connected to the door panel via a series of brackets.
The brackets can be purchased separately or mounted on the door assembly itself.
Get the brackets.
The brackets come with a lot of extras.
You will need to remove the door panels, install a sliding door arm and secure it to the car using screws.
Connect the brackets to the sliding door (a.k.a.
“the arm”) and connect it to your door panel.
Connect your sliding door to the brackets (b.k: the bracket) Using the bracket, screw it in and then slide it back to secure the bracket.
Pull the door arm (c.k.)
back and then turn it into an auto sliding door assembly (DSA) 5.
Install the sliding doors manually.
You will have to remove all the doors to install the DSA, but that’s ok, since the DSS will be installed with the sliding assemblies.
You are ready to go!
Pull out the bracket and slide it out to access the brackets on the sliding arm.
Use the sliding car door assembly (d.k) to pull out the sliding arms (e.k).
The sliding doors are ready for installation.
To install, you’ll need to loosen the brackets a bit to make sure that they are secure.
Installing the sliding carsdoor.
Note that you will need the bracket installed on the underside of the door and then on the top of the sliding side of the car.
Remove the brackets and install the sliding garage door assembly.
Pull out the brackets for the sliding floor assembly.
Using a screwdriver, remove the bracket that you screwed to the underside and then remove the sliding rear door.
Now, pull the sliding part of the house door off of the top and pull it out, just like you did for the car door.